MultiDyne Introduces DVI-5000 Multimode Fiber Transport Solution

MultiDyne Video & Fiber Optic Systems, a leading provider of fiber optics for the transport of video and audio for broadcast & pro A/V applications, introduces the DVI-5000 Multimode Fiber Optic Link, a cost-effective transport solution for short runs of high-quality uncompressed DVI signals over one or two fibers.
The DVI-5000 features stereo audio and data and support for DVI video signals up to WQXGA resolution of 2560 x 1600 over one or two fibers. The DVI Single Link version requires only one fiber for resolutions up to WUXGA 1920 x 1200, while the DVI Dual Link version requires two fibers for resolutions up to WQXGA 2560 x 1600. The system also supports stereo audio and bi-directional data for monitor control and uses no compression, with no user adjustments or calibration.
The DVI-5000 transports a pixel-for-pixel image that is 100% transparent with no frame dropping and enables 100% 24-bits for all scan rates with no contouring or bit reduction at a high scan rate. The system also provides a total throughout of up to 10 Gb/s and requires non-proprietary multimode fiber optic cable with a transport distance of up to 1 KM or 3,300 feet. The DVI-5000 transmitter unit supports a loop-through input and the receiver provides two DVI outputs. The system supports EDID from any monitor which is selectable between the loop-through monitor, internal generation on the transmit side of from the monitor on the receiver side.
Further information is available at: www.multidyne.com.
(KMcA/JM)